Download Intex Aqua R3 Plus Flash File (Firmware)

Below is the direct link to download the Intex Aqua R3 Plus Stock Firmware (flash file) from easy link. You can also download Flash Tool, Driver and instructions.Here, You will find every Android mobile flash files.

Download Intex Aqua R3 Plus Stock Firmware:

Model        :       Intex Aqua R3 Plus

Firmware  :       Intex Aqua R3 Plus Flah File
File size:    :      210 MB
Build Date :     2017

Requirement For Flashing : 

  • Intex Aqua R3 Plus Flash File (Firmware)
  • Intex Aqua R3 Plus USB drivers
  • SP Flash Tool
  • Your Smartphone should have at least 40 percent of battery to
    perform the Flashing Process.
  • Make a Backup of Your System, Apps, and Data otherwise all data are removed.

How to Install Flash file:

1.Download and install Intex USB driver on your PC.

2. Download and Extract Intex Aqua R3 Plus Firmware .

3. Power off your android cell phone.

4.After that, you will get the firmware file, flash tool, driver and how to flash guide.

5. Follow the guide line to flash the firmware on your Intex Aqua R3 Plus device.

6. Now your phone is into download mode: press volume down and volume up button and connect the device to the PC using the USB cable.

7.Now you’re downloading is start if yellow triangle sign appears then you will press and hold volume up button to continue.

8.Flashing process will be complete in 10 to 15 minutes. when the process is complete you will be able to see the green passed a message.

9. Now your device will restart automatically.

10 Congratulations, now you have successfully flashed the flash file download on your device.

Note:

  • This Firmware file is only for Intex Aqua R3 Plus. Don’t try this on any other device.
  • If you are going to flash the above  Firmware on your Intex Aqua R3 Plus device then
    take a backup of every thing as because your personal data will
    be deleted after flashing the stock firmware.

 

Add a Comment

Your email address will not be published. Required fields are marked *